Filter Product By
Slide and select filter/s
Filtered by
Categories
RELAY Click is a compact add-on board with general-purpose relays that any host MCU can control. This board features two G6D1AASIDC5s, slim miniature relays from OMRON. The relays offer low power consumption in a small, lightweight package with PCB pin mounting, which in some cases allows socket mounting. It comes with a dimension of 17.5x6.5x12.5...
Relay 2 click is a dual relay click board™, equipped with two single-pole solid state relays (SSR), built with the patented OptoMOS® technology. These SSR devices allow reasonably high current, up to 2A and voltage up to 30V (peak-to-peak). These relays also allow very fast switching time, thanks to the absence of any moving parts inside of them. Compared...
Flicker Click is a compact add-on board with a circuit for turning the devices ON and OFF. This board features the G6D-ASI, a power PCB relay from OMRON. The maximum switching loads of the G6D-ASI PCB relay are up to 5A, 250VAC/30VDC. The time between the load flicks can be set to last from 0.1 up to 6 seconds, while the on and off times can be set...
Signal Relay Click is a compact add-on board with four relays that any host microcontroller can control. This board features four G5V-1, an ultra-miniature, highly sensitive single-pole double-throw (SPDT) relay for signal circuits from Omron. The Signal Relay Click comes equipped with the 8-pin screw terminal, two for each relay. Through them, the relays...
Relay click 3 is a dual relay Click board, featuring two single-pole double-throw relays which can be operated by output pins of the host microcontroller (MCU). It offers an elegant and easy solution for controlling a wide range of power applications. Two SRD-5VDC-SL-C relays used on this Click board™ are hermetically sealed relays which require 5V across...
SolidSwitch Click is a compact add-on board that contains load switch devices. This board features the TPS22918, four single-channel load switches from Texas Instruments. Every switch includes an N-channel MOSFET that operates over an input voltage range up to 5.5V and can support a maximum continuous current of 2 A. The switches are controlled by an...
SolidSwitch 3 Click is a compact add-on board that contains a load switching device. This board features the BD8LB600FS-C, an automotive eight-channel low-side switch from Rohm Semiconductor. Every switch is controlled via an SPI interface and includes an N-channel MOSFET that supports a maximum current of 1A. The BD8LB600FS-C also has built-in protection...
Thermostat 2 click is a general-purpose thermostat Click board™ designed to be used with any temperature sensor based on the DS1820 sensor design: 3-pin package with 1-Wire® communication interface. The Click board™ is equipped with a 3-pole terminal and a 3-pin female socket. DS1820 (or compatible) sensor can be connected either over the terminal or can...
Relay 4 Click is a compact add-on board with a general-purpose relay that any host MCU can control. This board features the J1031C3VDC, high-current single-pole double-throw (SPDT) signal relay from CIT Relay and Switch. Highly sensitive, the J1031C3VDC offers a low coil power consumption in a small, lightweight package with PC pin mounting. It comes with...
Relay 5 Click is a compact add-on board with general-purpose I2C-controlled relays that any host MCU can control. This board features three J1031C3VDC.15S, a high-current single-pole double-throw (SPDT) signal relays controlled by the PCA9538A, a low-voltage 8-bit I/O port expander from NXP Semiconductors. Highly sensitive, the J1031C3VDC.15S offers a low...
Timer Relay Click is a compact add-on board that allows you to control the load with a timer. This board features the NE555, a precision timer from Diodes Incorporated. It is a precision timing circuit capable of producing accurate time delays in a monostable mode of operation. The Timer Relay Click features the SRD-5VDC-SL-C, a relay from Ningbo, to...
IPD Click is a compact add-on board for controlling inductive and resistive loads in industrial automation and other demanding applications. This board features the TPD2015FN, an 8-channel high-side switch with MOSFET outputs from Toshiba Semiconductor. This component is directly compatible with CMOS and TTL logic, making it ideal for driving motors,...
Loading
Load more
Loading
Viewed products
RS485 Click 5V is a compact add-on board that can be used as an interface between the TTL level UART and the RS422/485 communication bus. This board features the ADM485, a low-power EIA RS-485 transceiver from Analog Devices. It features a half-duplex communication capability, bus Idle, open and short-circuit detection, thermal shutdown, and more. It is well suited for transmitting data packets over long distances and noisy areas, using the twisted wire bus, which offers good electromagnetic interferences (EMI) immunity. This Click board™ makes the perfect solution for the development of low-power RS-485 systems, DTE/DCE interfaces, packet switching, local area networks, data concentrations, data multiplexers, and more.
RS485 Click 5V is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.
MIKROE-925$22.00
EasyPull Click is a compact add-on board designed to easily configure mikroBUS™ signals into pull-up or pull-down states, perfect for various applications. It features a universal setup with 4.7kΩ resistors to ensure stable performance across vital communication lines such as SPI, UART, I2C, and standard mikroBUS™ signals (AN, RST, PWM, INT). The board also includes two easy-to-use 8-position switches for quick signal adjustments, an unpopulated EXT header for extra GPIO functionality, and a special low-power mode to maximize energy efficiency. This Click board™ is an ideal solution for developers seeking to enhance their projects with reliable signal management, especially in the prototyping or final product development stages.
EasyPull Click is fully compatible with the mikroBUS™ socket and can be used on any host system supporting the mikroBUS™ standard. It comes with the mikroSDK open-source libraries, offering unparalleled flexibility for evaluation and customization. What sets this Click board™ apart is the groundbreaking ClickID feature, enabling your host system to seamlessly and automatically detect and identify this add-on board.
MIKROE-6053$11.00
Click boards Stand, measuring 220x266mm, is a meticulously crafted PCB board designed to house up to 35 Click boards™. Its high-quality PCB material ensures both durability and an attractive appearance in a sleek white design. An array of 35 mikroBUS™ sockets (5 rows per 7 sockets) offers effortless compatibility for various Click board™ functionalities, ideal for electronics enthusiasts and professionals. Discover the Click boards Stand – a versatile and user-friendly solution for storing and exploring the world of Click boards™.
MIKROE-5726$42.00
Planet Debug FRAME contains an IP camera with a high resolution of 2592x1944px. You can change settings such as contrast, sharpness, and orientation. And even though this camera is fixed, you can adjust focus and zoom. This camera will provide a visible, fixed angle of view, making it easy to see exactly what changes on the board while programming and debugging. Live streaming from this camera can be viewed in NECTO Studio IDE.
An essential element of the stream is good lightning. Light strips are placed inside the metal frame base. There is no need for extensive lightning adjustments; you just plug it in. When you position your board on the frame, like in the picture, you will get a perfectly illuminated board with excellent visibility on the live stream.
Note: This development board is not included in the package.
The package includes all the necessary equipment and cables for the camera and internet connection to function. Wires are placed on the frame below the camera view/focus so they don't obstruct the video stream. Cable management and software setup details will depend on the location you're on. All equipment used in the photo illustration is included in the package.
MIKROE-6358$990.00