This tutorial will show how to add your own custom IP to SDSoC system and have it integrated with PetaLinux.
hRobot is an open source, connected, 3D-printable robotic arm, powered by ROS, with 500g lift capacity.
FlyingROS is a set of tools and libraries helping you to make autonomous flight with your multicopter.
Guessing what it can do? It draws what you draw in front of the webcam, real-time by means of a 2D arm.
Play Connect Four (the common board game) against a robotic arm.
An automated robotic arm sorting colored objects using computer vision and real-time operating system.
I have designed and built a prototype of an underwater robot with ARM technology AI. For the monitoring, cartography and data collection.
Homemade low-cost CPLD dev board (STM32F103 and Altera MAX II EPM240/EPM570 CPLD). Two dev boards into one.
This project walks through the base workflow for accelerated application development on the Kria KD240 in Vitis Unified 2023.2
Explore M3 is a feature rich ARM Cortex M3 development board. It can help you prototype ideas faster with Arduino and take them beyond.
This project walks through the steps of how I designed my own custom carrier board for the AMD Kria™ K24 SOM.
OK3399-C single board computer is based on Rockchip RK3399 SoC consists of SoM and carrier board, carries 2GB RAM and 16GB eMMC on-board.
IoT service for museums
Compact ESP32-S3 + FPGA +LCD dev board with Wi-Fi, web-based JTAG/debug, voltage-tunable I/O, and local GDBServer/OpenOCD/FPGALoader tools.
A system to keep people with dementia from leaving the house unnoticed.
