ESPRanger is a compact and powerful STEM Community board that includes LoRa GNSS IMU RS485 Wide Operating Voltage 5-60V SDK
My dream is a foldable Meshtastic Communicator with an internal antenna and a changeable 18650 battery.
Monitoring the composting process using gas detector RAK12004 - MQ-2
A review of Elecrow's Meshastic devie line including the ThinkNode M1, M2, and the Crowpanel
Use a Wio Tracker L1 to build an off grid, solar powered Meshtastic node suitable for remote deployment as a tracker, sensor or repeater.
Weekend notes on Spectre: create a channel, pair a team, do urban/rural range walks, and keep the power sane.
A standalone off-grid LoRa pager/messenger device for the end of the world. :-)
Build your own LoRaWAN "The Things Network" packet-forwarding gateway on Windows 10 IoT Core in native .NET code.
Long Range and Mesh: what do you want more! An easy step by step guide ( with ready made boards )? Let's go!
The Ripple QWERTY firmware has been ported to the T-Deck!
Connect the project to your laptop or phone and then chat between the devices without internet or SMS using just LoRa.
Make your own emergency LoRa mesh chat radio with the new TTGO LoRa development board.
Connect multiple Dallas 1-Wire temperature sensors. They are auto detected. Configure LoRa keys over USB serial port, no programming needed.
If you quickly want to exchange messages between 2 or more LoRa-E5 modules, this project will act as a guide to you!
Meshtastic is a project that lets you use inexpensive ($30-ish) GPS radios as an extensible, super long battery life mesh GPS communicator.
Tutorial on LoRa RFM95 or RFM98 from HopeRF. Comparison to Ra-02 from Ai-Thinker & Reyax RYLR896.
Send and receive temperature data over LoRa using a pair of BBC micro:bits
Simple demonstration of usage of LoRa RA-02 Module to transmit temperature sensor values using Arduino UNO
A lore Node that transmit environment data
If you need to send encrypted data using LoRa protocol, check out this easy tutorial.
The latest in the Ripple Qwerty Pager series adds maps to your secure LoRa mesh messenger device.
My project is a library for E32 LoRa (Long Range) device very cheap and long range (from 3Km to 8Km), to simplify usage and conf.
We will be interfacing the high powered E32 1 Watt LoRa module from eByte with an ESP32, the same method is used for an Arduino or ESP8266.
If you are looking for the definitive guide to start with WisBlock Kit, here it is. Doesn’t matter if you are a beginner or a pro!
