Getting Started with Spresense Camera

Hello Everyone Here. This Project gives the introduction to the usage of the Sony Spresense Boards. Project Focuses on the usage of the Spresense Camera Board. There are the Basic requirements which we Mentioned Above.

First, connect the board to the Computer as given in the steps below:-

Step 1: Connect the Spresense Main Board and the Extension Board as shown Below.

Step2: Now, insert the SD Card in the Extension Board. Make sure that, the SD Card is Formatted as FAT32 Drive. Spresense does not support the SD Card formatted as exFAT Drive.

Step3: Now Connect the Spresense Camera to the Spresense Main Board as shown in the below Image. Please Connect the Camera Board Correctly as Shown Below.

Step4: Connect the Spresense Main Board to the Computer and Program the Spresense Board using Arduino IDE and See the Output.