Control and automate your electrical appliances from long distances (Kms) without the presence of the internet. This is possible via LoRa.
A sample Arduino Nano client for my Windows 10 IoT Core on RPI based LoRa field gateways.
The arrival of small satellites that used LoRa for telemetry data has meant that less technically qualified persons, with a very low budget,
We'll walk you through adding a GPS module to your existing Heltec V3 Lora ESP32 Meshtastic Node. This guide will work also for any ESP32 bo
A sample Arduino MKR WAN 1300 client for my Windows 10 IoT Core on RPi based LoRa field gateways.
In this tutorial, we will learn how to build an inexpensive LoRaWAN Gateway Using Seeed Studio WM1302 module.
How to connect the STM32 LoRa Discovery Kit to AWS IoT using EC2 and MQTT
This project implements a LoRa-based GPS virtual fencing solution for livestock and wildlife management.
Creating 16x16 Pixel Colored Image using RAK14012 LED Matrix Display Module
A simple project to receive message on NodeMCU through LoRa and display it on a Blynk app.
Measure water quality in real time. Deploy sensors over a wide area, collect measurements, chart and analyze it.
The system uses Hall sensors to log the latest door opening timestamp, enabling users to access data anytime on the Snapemu.
Build an easy-to-deploy, low-power sensor node that monitors growing conditions and transmits data offsite where it's securely accessible
Temperature, humidity, lux, pressure. Create LoRa node under 30 minutes. No wiring, no coding. With Ubidots you add graphs and widgets.
This guide will walk you through connecting your Adafruit Feather RP2040 board to The Things Network V3 using LoRaWAN.
In this article, you will learn how to use the P-NUCLEO-LRWAN2 kit, and also the B-L072Z-LRWAN1 board, integrating them with LORIOT.
In the Lora IoT project tutorial, I have shown how to make the LoRa Arduino ESP8266 control relay from the Blynk IoT platform with feedback.
Create your own Meshtastic LoRa Node with our easy DIY guide. A complete step-by-step for building your customized mesh communication system
E32 LoRa (long range) device very cheap and very long range (from 3Km to 8Km), here an Arduino shield for my library.
It is a portable device that sends a signal every time it moves. It uses the free LoRaWAN network that through TTN allows internet access.
Using the Blues Notecard LoRa, along with a Cellular + Wi-Fi Notecard, allows you to build a bulletproof wireless connectivity device.
Secure your LoRaWAN communications using a Raspberry Pi and a TO136 adapted for IoT application.
This sample project shows how to build LoRa connected soil moisture sensor (analog)
Not quite sure what LoRa is and ready for some micro soldering. 👍 This is what I learned from my experiments with the SX1278
